How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 1151
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I need to know the procedure to calibrate the governor actuator

Customer Question

I need to know the procedure to calibrate the governor actuator on a Cat 320l excavator I've changed out the actuator and now need to calibrate the ecm
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  catmastertech replied 1 year ago.
Please post the full machine serial number so I can find the correct procedure.The 320 models do not use a 3306 engine, that was normally in the 330 model. A 320 will use a 3066 engine (Mitsubishi design).Is the monitor fully functional? Have you ever used it to find or calibrate anything before?

Related Construction and Road Equipment Questions