How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85
dd85, Technician
Category: Construction and Road Equipment
Satisfied Customers: 493
Experience:  Service amanger for over 15 years
15057492
Type Your Construction and Road Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

I have an early 90s Ford New Holland L175 Skid steer Loader.The

Customer Question

I have an early 90s Ford New Holland L175 Skid steer Loader.
The problem it has is when I raise the boom it spews out hydraulic fluid in great volume from the hydraulic tank breather. This problem has recently occurred after years of use. I could not find anything in the workshop manual with this problem. I have dismantled the control valve unit and all seems good. Re fitted to the unit but the problem is still there.
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  dd85 replied 1 year ago.
Are you sure of the Model "L175" ? Wondering because they didn't make the L175 until January 2007 ?
Customer: replied 1 year ago.

Hi,

Sorry its a Ford New Holland L785

Expert:  dd85 replied 1 year ago.
You are talking about the fill cap on the right side? Correct?
There is a hose from the front hydraulic pump to the reservoir. Make sure the hose clamps are tight, and the hose doesn’t have any cracks in it.
This could cause air to enter the hydraulic system.
There is a suction screen that may need cleaning.
Please reply and I will see if I can attach
Expert:  dd85 replied 1 year ago.
The way the system is set up I need you to reply so I can attach some information.

Related Construction and Road Equipment Questions