How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 4373
Experience:  17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
65405794
Type Your Construction and Road Equipment Question Here...
Dan is online now
A new question is answered every 9 seconds

On our new Holland 410 it has started not going in reverse,

Customer Question

On our new Holland 410 it has started not going in reverse, they have check the solidnied and that's fine then it works for a day then won't go in revers. We have changed the fuse also. Do you have any ideas please as we use it every day on the farm
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  dd85 replied 1 year ago.
check the voltage at the solenoid, put a meter on it and watch it when it stops. It may be the shuttle lever switch.
Customer: replied 1 year ago.
This has already been regarding the shuttle leaver switch, what would be the easiest way to find the cracked wire which would be causing the problem on the voltage on the solenoid? Would wire have to be re wired?
Customer: replied 1 year ago.
This has already been regarding the shuttle leaver switch, what would be the easiest way to find the cracked wire which would be causing the problem on the voltage on the solenoid? Would wire have to be re wired?
Customer: replied 1 year ago.
Relist: Other.
We have already tried what was recommended but is there anything else please, finding it frustrating as it works and then stops in the middle of a job
Expert:  Dan replied 1 year ago.
Hi my name is***** will be glad to help. To test use a volt meter at the solenoid or a test light while having someone shift through each gear position with the IGN switch on. If you have power to the solenoids as the solenoids powered in each gear will change then try swapping solenoids and inspecting for damaged o rings. If there is no change or no power from the shift control switch then the shift controller is bad if there is power in to the shifter but not out ( Common wear item) If the electrical tests good then check the filter and transmission oil and strainer for discoloration/burn smell and signs of metal/debris indicating an internal problem. Let me know

Related Construction and Road Equipment Questions