How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1
spankyjr1, Journeyman
Category: Construction and Road Equipment
Satisfied Customers: 2514
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
65057319
Type Your Construction and Road Equipment Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

Isuzu blp track: lam charles I'm look timing maxs

Customer Question

Hi lam charles I'm look timing maxs for injection pump 4hf1
Submitted: 1 year ago.
Category: Construction and Road Equipment
Customer: replied 1 year ago.
If we put pump at a mark. Diesel pump outlet pipe not a drop
Expert:  spankyjr1 replied 1 year ago.
Hi Charles, my name is ***** ***** you for your question.
Sorry for delay.
Before you took off pump did you put engine on number one cylinder compression stroke?
When you install a new pump or have yours rebuilt the pump is set for number one cylinder on compression stroke when you get it.
Before you install pump rotate engine and align marks,,pull valve cover off and make sure you can move rockers on number one cylinder to know you are on compression stroke,,if rockers are tight bar engine over by crank one full turn and re check rockers they should now be loose.
Now you are ready to install pump.
Please take a moment to rate my service so that I can get credit for my time.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
spanky

Related Construction and Road Equipment Questions