I have a megga 200 daewoo wheel loader will not shift in to 1 st or 2 nt I have 3 rd &4 th can anyone tell me what to check thanks
Country: United StatesMake: DaewooModel: Mg200Year: 1999 Already Tried: I have replaced shifter on Collim and new shift cylinoids still not working have high gears no lowe gears
Hi my name is XXX. X will try to help. I see you replaced the controller and the solenoids. Test for power at the solenoids in each gear position to make sure your wiring harness is ok. If so then check your filter/strainer and oil for signs of metal and debris that would indicate internal problems such as excessive leakage within your clutch packs, worn clutches, pump etc. It is also recomended that you have your pressures checked and compared to OEM specs. This will also help you pinpoint the source of your problem.... I hope this helps.... Thanks for using JA