YES i have just bought an ingersoll model#231hp-tk1 1/2 Air Impact Wrench and there is know instructions on how to oil & grease it & were............ Thanks
Already Tried: Have looked at Ingersol web site but found nothing...........
Hi I'm Wayne I will help you with this Good AfternoonMost of the IR guns, use IR oil and 4 drops in the air chuck, with trigger squeezed, Do this every time you use it more then 20 minAs far as grease goes, if it is grease able , on the back of gunon the cap in center is a dimple, use a needle point grease tip to do that thin grease like Vaseline, 3 pumps
That helped. Thanks for everything.....
You are welcome
Experience: worked on many road graders, Bull dozers , skid steers, Rollers