How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask catmastertech Your Own Question
catmastertech, Technician
Category: Construction and Road Equipment
Satisfied Customers: 2219
Experience:  Field service technician for CAT 19 years.
Type Your Construction and Road Equipment Question Here...
catmastertech is online now
A new question is answered every 9 seconds

caterpillar d5m lgp dozer, how to remove blade pins ?

This answer was rated:

caterpillar d5m lgp dozer, how to remove blade pins ?

Bulldozer Tilt Cylinder (VPAT) - Remove and Install

Bulldozer (VPAT) - Remove

A press must be used to pull the pin. Tooling must be metric threads. If thread hole is damaged or pin cannot be pulled out, cutting the pins (two parts) is the only way. I have had to cut out several. It has always been a 50/50 shot to get the pins to pull out.

catmastertech and other Construction and Road Equipment Specialists are ready to help you

Related Construction and Road Equipment Questions