how to replace the wear blocks and chain in a 2004 330B Telelhandler telescoping boom?
Hi my name is XXX. X will try to help. First you need to disconnect and cap the lines that goto your forks(using mechanics wire wrap the ends tighly so you can use this wire to fish the lines back through later and it helps to mark them too for reassembly. You will need to fish the lines out the back of the boom. you will also need another machine , crane or hoist to lift and slide the boom sections out once you have disconnected the cylinder mounting pins, and the wear blocks at the end of the boom etc. Without the proper hoisting equipment, this job would be very difficult as it is a pain even with the correct equipment. I hope this helps. Let me know if you need further assistance. Thanks for using JA
1995 Wyo-tech graduate 17+years shop/field experience/on all major brands of heavy equipment and trucks.