How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Randy Computer Tech Your Own Question

Randy Computer Tech
Randy Computer Tech, Computer Support Specialist
Category: Computer
Satisfied Customers: 9430
Experience:  Computer Technician
62741268
Type Your Computer Question Here...
Randy Computer Tech is online now
A new question is answered every 9 seconds

Looking manual ingnersol rand s60 generator. I have searched

Customer Question

Looking for a manual for an ingnersol rand s60 generator. I have searched the internet high and low with no luck.
I have two error messages
SD VG3 Over
SD VG1 Over
Submitted: 8 months ago.
Category: Computer
Expert:  Randy Computer Tech replied 8 months ago.

That sounds like a fault with the Voltage regulator.

Here is the trouble code list.

Expert:  Randy Computer Tech replied 8 months ago.

Check the safety switch first.

Customer: replied 8 months ago.
Okay any idea where the safety switch is ? I don't have anything on this generator for manuals
Expert:  Randy Computer Tech replied 8 months ago.

It should be next to the control panel.

Customer: replied 8 months ago.
You mean the emergency stop switch ? It isn't engaged.
Expert:  Randy Computer Tech replied 8 months ago.
Customer: replied 8 months ago.
Or the main power switch next to control panel
Customer: replied 8 months ago.
Any idea where I can find a manual for this thing for future issues. I have to move it slightly to get control panel open
Expert:  Randy Computer Tech replied 8 months ago.

No. I have a manual for a similar unit. The Magnum MLG.

Customer: replied 8 months ago.
Okay so I don't have a safety switch in my box
Customer: replied 8 months ago.
Mine is using the full intelisys control system so I know what the error is now just not how to fix it
Expert:  Randy Computer Tech replied 8 months ago.

Okay, was the code guide I sent you the right one?

Related Computer Questions