For Online Computer Support, Ask a Computer Technician
My name is ***** ***** certified professional with over 10 years experience. I will be glad to assist you with this.
>>PLEASE CLICK HERE FOR THE MANUAL<<<
To program a known frequency into the BC340CRS:- Power the scanner ON- Press the E/PGM key to enter programming mode- Enter the number of the channel that you wish to program- Press HOLD- Enter the frequency, including the decimal point (e.g., 156.225)- Press E/PGM to enter the frequency into memoryPress the UP or DOWN arrow to advance to the next channel you wish to programPress HOLD or SCAN to exit the programming mode.
>>>>PLEASE CLICK HERE FOR PROGRAMMING
>>>>PLEASE CLICK HERE FOR THE CABLE END
Please let me know if you need any other assistance.
Please take a moment to rate my service positively by clicking one of the stars at the top of the screen then click on submit.
Thank you very much!