Hello. My name is XXXXX XXXXX X will be assisting you today.
is it GeForce GTX 590
I have 2 gtx 590 sli point of view ultracharged
with core clock 670
I have tried to reset it to defalt nvidia gtx 590
but my temperature is hitting 86 degrees in windows
my computer is alienware area 51 alx
cooling is not that good
I wanted to purchase 2 gtx 590 from dell but I have already 2 gtx 590 overclocked
I want to do something with my used money
does the cabinet has enough vent?
there is not enogh fans I thin k
but it has some ventilation
it is open 100% on the roof
turn off the computer or shut it down
remove the side cover
it is hitting 88 degrees without doing anything in windows
remove the side cover check for all the are fans are working on not
I pushed both fans to 95% now
I think the hot air need more vent
it is getting hot very quickly without opening the side door
i will walk you through to check
shut down the computer
and open the side cover
can you check if it clocked to factory nvidia cloks?
did you overclock the video card?
no I bought it overclocked
I want to clock it back to nvidia clocks
so it does not get to hot
it is running max 65 degrees now
it was 88 before
ok thats good
is the side cover closed or open
Nvidia's GTX 590 is not a card that needs to be overclocked for gaming performance.
are all the fans working
2 fans working 95%
what about the inbuilt fan on the video card?
is that working
that is built in fan on video fan is working 95%
now close once side of the cover
it is only opened from one side
vddc is showing 0.9750
now close the cover and check the temperature
let me know
2 0.9750 one 0.9630 and one 0.9130
I set voltage to 0.9130 in msi afterburner'
but it is showing 0.9750 fo vddc in gpuz
I want 0.91
so it is default
how do I set voltage to what I want?
msi afterburner does not seem to help
now the highest is 64 degrees
set it to 1.1v in msi afterburner
1.1v is too high
It's probably a driver problem. Have you updated your drivers recently?
yes it is updated
are you using windows 8 or windows 7
I checked in google others sayd default is 0.91
yes its default
when did the heating problem started
when I bought the gtx 590 overclocked edition
in games like civilization 5 or battlefield 3 I must play with opened cover
the problem is that one graphics card is working at higher temps than the other
I tried and I foun it has to do with motherboard itself
there is no room between graphics cards
one graphics card is adding the heat to the over card
one last question to you
I tried to place graphics cards to 1 and 3 on mother board
how many cards are installed on the motherboard
but it runs only 8pci lines on third pci
16 on 1 and 2
can you take a picture and post it here
8 on 3
my mobile phone it too weak when I take the picture
picture of what?
is there an option to swap the cards
what all cards are installed apart from this nvidia
how to swap?
please tell me how many cards are installed and what are they
the problem is that vddc is only changing on 1 card in ms afterburner
in 1 and 2 pci
you have 3 pci slots?
in slot 1 and 2
if I use slot 3 it will show 8 lanes
instead of 16
3 is not good
third is not good
slot 3 must not be pci express 32 that is why it show 116
on which slot the gtx 590 is sitting
slot 1 and 2
from the cpu
there are two things you can try.
ok before that you didnt tell me what cards are installed on the slots apart from gtx 590
only 2 gtx 590 is installed
and you are using 2 displays as well.
only 1 display
why is vcore on cards different?
I cant set it 0.91 on all cards
and the display is connected to gtx 590 only one card and not both correct
you will have to remove one gtx 590 card out
leave the other one in on which the monitor is connected.
but vddc is different on all 4 gpuz
the other card is not being used and its using the same resources of the video card driver that is why its unable to balance the voltage ratio
what do I do
I tried to remove graphics cards before without achieving anything
if you are using dual display then you will have to reinstall a fresh copy of the video driver so that both cards works independently with the program
why have you installed two video card?
ok let me tell you this
if you are using 2 video cards and your lcd is connected to one card that means the other card if free and is not being used however the 2nd card is using the resources and more power to keep the card on.
but I have sli bridge
how it is not used
sli is connected?
all 4 gpuz are sli enabled
with the micro cable on top of it
it is running qued sli
ok then its fine
now what we can try is
vddc is different one one gpu
it is only changing vcore one one gpu
uninstall the currently installed video driver software which i doubt is creating the problem
3 gpuz is not changing their vcore when I change vcore in msi afterburner
that is what we are trying to fix
I tried to uninstall drivers before it did not help
in device manager it is showing the same driver on 4 gpuz
did you restart the computer after you removed the driver before installing it back
182mb memory is used by every gpu
gpuz are using the same memory amount
alright, i will let other experts to answer this.
i have exhausted my resources.
is that okay
I try to run civilization 5
mybe it is working fine now
I think there is no need to buy graphics cards from dell when I already hae 2 gtx 590
what you think?
in dell they say that their gtx 590 might overheat too
what i feel the exhaust is the issue and if you let the cover open then i should work fine as heat will be ventilated and will keep the video card up in running
yes that is what I do normally
No you dont need to buy another video card.
I played battlefield 3 fine
but benchXXXXX XXXXXke furmark is showing only 30fps
that is very low for quad sli gtx 590
try civilization 5 and see if its better with the cover opened
if you want i can check few other thing on your computer to make the game work better
what kind of things?
today I get my other compute from repair
I used driver reviver and lost all my data and drivers
the sharkgaming has repaired it
it took 2 days
in about 1 hour I will drive to take my computer back from sharkgaming
i will check the drivers and the utilities and unwanted resources which is running at the background and stop then which will increase the efficiency of the computer.
I already have it running very well
I have cleaned malware and registry
I doees not use much of my system
I dont need to change anything now maybe only vddc
maybe some other experts can change my vddc
sure i will open the question now.
you will get an email when you get a reply from an expert.
the problem is that civilization 5 is not starting at all now
even when I use factory clocked settings
it does not work in games with msi afterburner.
with ntune installed I got many blue screens and crashes so I removed it and set new setting with nvidia performance tools