How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask J Tech Your Own Question

J Tech
J Tech, Computer Support
Category: Computer
Satisfied Customers: 991
Experience:  Owner of X XXXX Computer Repair
Type Your Computer Question Here...
J Tech is online now
A new question is answered every 9 seconds

Im getting an error 32 - unable to print on a Brother HL-4070CDW

Resolved Question:

I'm getting an 'error 32 - unable to print' on a Brother HL-4070CDW color laser printer. How do I clear it?

I've examined the drum, toner, and rollers for cleanliness and stuck chards of paper. Everything looks good. I've also removed the belt and waste tray and wiped off the black plastic at the rear of the printer. I'm not sure though that I'm cleaning the density sensor, as some suggest I should. The printer is two years old.
Submitted: 5 years ago.
Category: Computer
Expert:  J Tech replied 5 years ago.
Detailed instructions on how to remove the error can be found here.

If this does not solve the issue the low voltage power supply is dead. This is a common problem with these printers.
J Tech and 9 other Computer Specialists are ready to help you

Related Computer Questions