How do I secure my Belkin 54g wireless router?
Hi, Go to router configuration page, in that wireless option, in that security option. Then give the wep or wpa option, then give password, then save it and re-try it to connectAccess point configuration1. Open a Web Browser 2. In the address bar type the IP address of your access point. Note: By default the IP address is 192.168.2.254 3. Click on Security in the left hand column under Wireless 4. Enter your password if any and click Submit 5. Select WPA-PSK (no server) from the Security Mode section 6. Enter your Pre-shared Key Note: You can mask your Pre-shared Key by selecting Obscure PSK 7. Click on Apply ChangesNetwork adapter configuration1. Go to Start and click on Control Panel. 2. Control Panel window will appear. Double click on Network Connections. 3. Network Connections window will appear. Right click correct Wireless Network Connection by identifying correct wireless network adapter and click View Available Wireless Networks. 4. Wireless Network Connection window will appear. Select the network you wish to connect and click Connect. 5. The should now be security-enabled. 6. Enter the WPA-PSK network key you set up in the router as above. 7. If all goes well, you will connect to wireless network at last.Good Luck