How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ATLPROG Your Own Question
ATLPROG
ATLPROG, Computer Software Engineer
Category: Programming
Satisfied Customers: 7677
Experience:  MS in IT.Several years of programming experience in Java C++ C C# Python VB Javascript HTML
44910485
Type Your Programming Question Here...
ATLPROG is online now
A new question is answered every 9 seconds

This is not a duplicate question". "Instrument CTRL using

Customer Question

This is not a duplicate question".
"Instrument CTRL using GPIB in excel
Already Tried:
Searching for a step-by-step programming example.
Have an NI GPIB-USB-HS interface module and driver SW.
Have an HP 4140B I would like to control...."
The 4140B is 488.1 compliant and needs a serial poll event to get and clear the status info.
The SRQ bit is set whenever the 4140 has data to pass or an error event was detected.
A serial poll request is sent after a "parameter set" event to verify that all is ok or an error has occured.
Submitted: 8 months ago.
Category: Programming
Expert:  Kevin T replied 8 months ago.

How's it going.
Let me read of your question. Give me a minute.

Customer: replied 8 months ago.
are you active now ?
Expert:  Kevin T replied 8 months ago.

Yes John

Customer: replied 8 months ago.
What have you discovered ?
Expert:  Kevin T replied 8 months ago.

I do not understand what you are asking, you are speaking about model numbers and not explaining.

Could you explain please?

Customer: replied 8 months ago.
I am not where the instumentation is as of now...I will be there tomarrow.
What have you discovered ?
Customer: replied 8 months ago.
I am asking for a sample code listing for making measurements within Excel using a GPIB interface to an HP 4140B.
Customer: replied 8 months ago.
What have you discovered so far ?
Customer: replied 8 months ago.
Can you pass me an excel file that uses VBA and the NI-GPIB driver SW to control and get data from a DVM ?
Customer: replied 8 months ago.
Are you still there ?
Customer: replied 8 months ago.
I will begin again in the AM...
Bye for now......
Customer: replied 8 months ago.
Are you active ?

Related Programming Questions