How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask arsufi Your Own Question
arsufi
arsufi, Computer Hardware Engineer
Category: Networking
Satisfied Customers: 1136
Experience:  MCSE, RHCE, IBM System X Server Certified
50085326
Type Your Networking Question Here...
arsufi is online now
A new question is answered every 9 seconds

I installed a Linksys E1200 system at my home in Feb 2015.

Customer Question

Goodmorning my name is ***** ***** I installed a Linksys E1200 system at my home in Feb 2015. Everything is working fine but I would like to change my guest password. I do have my original setup disk and all of the associated information used at time of installation. Thank you
JA: How much experience do you have with this particular Linksys product?
Customer: Just the original setup which was very straight forward
JA: What happened right before this popped up?
Customer: Before what popped up
JA: What troubleshooting have you tried?
Customer: Absolutely none
JA: Anything else you want the network expert to know before I connect you?
Customer: nothing
Submitted: 3 months ago.
Category: Networking
Expert:  arsufi replied 3 months ago.

Hi Paul,

My name is***** am sorry to hear that you have this issue, I look forward to assisting you today with your question and providing the best answer possible.

Please save this page to favorites( ctrl + d) so that you can reconnect in case you get disconnected.

Expert:  arsufi replied 3 months ago.

I hope you have connected to Linksys Router..

If so, this is what you have to follow.

1: Find default gateway address ip address. If your system is WIndows you can find by

Click Start > type CMD press enter key

This opens Command Prompt Window

Expert:  arsufi replied 3 months ago.

2: On Command Prompt window, type ipconfig press enter key

Under Wireless adapter, you can see system ip address and its gateway..

Note down default gateway ip address, this would you be your router ip address

*

3: Now open Browser, and type gateway ip address on address bar and press enter key

This takes you to Linksys router console.

*

4: Enter Linksys console username and password

*

5: Once logged in, click Wireless Tab > Security

There you can change guest password ***** your router

Note: You must press the save button after entering new password

Expert:  arsufi replied 3 months ago.

Let me know it helps...

Please feel free to ask if you stuck somewhere. I am waiting for your reply

Thanks

Customer: replied 3 months ago.
Hi Arsufi, I have a macbook pro laptop. Could you help me?
Customer: replied 3 months ago.
hello are you there?

Related Networking Questions