How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Claws224 Your Own Question

Claws224
Claws224, IEEE Network Engineer
Category: Networking
Satisfied Customers: 1256
Experience:  IEEE, Microsoft
5195814
Type Your Networking Question Here...
Claws224 is online now
A new question is answered every 9 seconds

Site A has 5 rooms. Site has 1 room. Site C has 4 rooms. You

Customer Question

Site A has 5 rooms.
Site B has 1 room.
Site C has 4 rooms.
You are have been assigned the net block 128.60.80.0/23 by your ISP. You will link up
to them via a serial link using 64.4.5.8/30 (.9 is them, .10 is your end).
At site A you have 5 rooms which need to support up to 45 hosts each.
They can all be on the same subnet (but don't necessarily have to be)
At site B you have 40 workstations. They should all be on the same subnet
At site B you also have 25 servers behind a router/firewall. These hosts are to be firewalled from
internal as well as external hosts. The router/firewall has 2 Ethernet interfaces (eth0 and eth1)
At site C you have 4 rooms with 20 workstations each.
They can all be on the same subnet (but don't necessarily have to be)
Site A links to Site B via a dedicated Serial interface.
Site B links to Site C via a dedicated Serial interface.
Site C links to the ISP via a dedicated Serial interface.
You have anticipated her needs and have already purchased and have available the following
equipment:
a.) Gigabit Manageable Fast Ethernet switches
48 port switches
24 port switches
8 port switches
b.) Routers with 2 Gigabit Ethernet interfaces
Fa0/0
Fa0/1
and one serial interface: Serial0
Project Notes: You can use any number of these switches.
You do not have to use every port on any switch. Document the unused ports as available for
later expansion.
You can use any number of these routers.
You do not have to use every interface on any router. Document the unused interfaces as
available for later expansion.
c.) You also have one (and only one) Router/firewall with two, 100Mbps Ethernet interfaces
eth0
eth1
Divide up the /23 you have been assigned to accommodate the needs of the site.
Produce one logical map which shows a layer 3 map of the network and includes all subnets and
address ranges for each subnet.
Need to include a textual (narrative) description of the network which
describes the subnets you designed and allocated to each location, and some background
justification for your selection.
Submitted: 20 days ago.
Category: Networking
Expert:  Syseng replied 19 days ago.

Hello,

My name is David.

Is there a length or format requirement for the narrative portion of the project?

By when do you need the narrative and network design document completed?

Thanks,

David.