How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Satchi Your Own Question

Satchi
Satchi, Computer Support Specialist
Category: Networking
Satisfied Customers: 2443
Experience:  Computer Softaware Engineer
18133961
Type Your Networking Question Here...
Satchi is online now
A new question is answered every 9 seconds

Motorola Milestone 3 USB port question: how do I change the

Customer Question

Motorola Milestone 3 USB port question: how do I change the USB from charging mode to data transfer mode? I've been using it as a charger and now want to transfer pictures from my gallery to my PC (Windows 10).
Submitted: 10 months ago.
Category: Networking
Expert:  Satchi replied 10 months ago.

Hi ,

Please follow the below steps

  1. Connect the device to a computer using the supplied USB cable.
  2. Select Menu.
  3. Select Notifications
  4. Select USB connection.
  5. Select USB Mass Storage then select OK.
    Enabled when a green indicator is present.

Source - http://www.verizonwireless.com/support/knowledge-base-45110/

Regards ,

Satchi

Customer: replied 10 months ago.
I connected the USB between my phone and my PC. There is nothing on the PC or the phone that refers to notifications pertaining to USB. Are these instructions for the Motorola Milestone 3 or my Samsung PC using Windows 10?
Expert:  Satchi replied 10 months ago.

These should appear on motorola phone