How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Claws224 Your Own Question

Claws224
Claws224, IEEE Network Engineer
Category: Networking
Satisfied Customers: 1256
Experience:  IEEE, Microsoft
5195814
Type Your Networking Question Here...
Claws224 is online now
A new question is answered every 9 seconds

How do I install a RT-AC56R up in my shop in repeater mode

Customer Question

How do I install a RT-AC56R up in my shop in repeater mode to communicate with the RT-AC68R that is installed in the house? When I type in the IP address for AC56R, even hard-wired to the computer, it defaults to the settings of the AC68R, including making it an Access Point. Is there a certain order that I configure them and power them on?
Note that it was working before in repeater mode, until I messed with it.
Also, we have solar pane monitoring unit hard-wired to the RT-AC56R via an Ethernet cable.
Submitted: 10 months ago.
Category: Networking
Expert:  Jason Jones replied 10 months ago.

Hello,

I will be the person helping you today.

I can see that you may need a little bit of extra help.

May I ask if you still need help with this problem? If so, may I start a screen sharing session on your computer and help you resolve the problem?

Once the remote session begins, we will be able to communicate via a chat window on your computer.

Thank you,
Jason

Expert:  Jason Jones replied 10 months ago.

Hello,
May I ask whether or not you still need help with this problem?
Thank you,
Jason