How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Claws224 Your Own Question

Claws224
Claws224, IEEE Network Engineer
Category: Networking
Satisfied Customers: 1256
Experience:  IEEE, Microsoft
5195814
Type Your Networking Question Here...
Claws224 is online now
A new question is answered every 9 seconds

I purchased a wireless N150 access point WN604 to replace an

Customer Question

I purchased a wireless N150 access point WN604 to replace an aolder WG602v4. I have a linksys wired router and was able to configure the older model by using netgearXXXXX where the x's are the last six digits of the MAC address of the N150. I tried to that with the new N150 and it does not allow me to access the device to configure..
Submitted: 10 months ago.
Category: Networking
Expert:  Byron replied 10 months ago.

Hi Richard. My name is***** you for your question and the opportunity to assist.

I don't know if you've seen this: http://www.downloads.netgear.com/files/GDC/WN604/WN604_UM_5June2014.pdf

In my opinion these are very good instructions from Netgear on how to set up the AP.

Take a look and let me know if there are still issues and I can help out.