How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Randy IT Tech Your Own Question

Randy IT Tech
Randy IT Tech, Network Administrator
Category: Networking
Satisfied Customers: 9256
Experience:  Information Technology Specialist
62741268
Type Your Networking Question Here...
Randy IT Tech is online now
A new question is answered every 9 seconds

How do I connect a wii to a LF320EM4 A

Customer Question

How do I connect a wii to a LF320EM4 A
Submitted: 12 months ago.
Category: Networking
Expert:  Randy IT Tech replied 12 months ago.
  • Ensure you are using the Wii AV Cables that came packaged with the system.

What to Do:

  1. Locate the audio/video input jacks AND the component input jacks on the TV.
    • Inputs are typically located on the back of the TV, but occasionally are on the sides, top, or bottom. They may also be located behind a hidden panel or door in the television.
    • Look for inputs marked Audio and Video IN.
    • Do NOT connect the system to anything marked OUT.
  2. Connect the rectangular plug of the Component Video Cable into the Digital AV Out port on the back of the Wii console.
  3. Connect the Component Video Cable to the television as follows. (Note that the Red and White audio cables are bound together with a black band labeled "audio.")

    Component Video Cable

    Red:Pr/Cr (Red)

    Blue:Pb/Cb (Blue)

    Green:Y (Green)

    White:Audio Input Left (or Mono)

    Red:Audio Input Right

    • If the cables you are using to connect the Wii to your television have only three connectors, click here.
  4. If the TV is capable of displaying Progressive Scan, Progressive Scan mode will need to be enabled after the connection is complete in order for the console to output a Progressive Scan signal. How to
  5. Once the cables are inserted and the Wii is powered on, find the Input Select for the TV to view the game (it is likely not going to be seen on Channel 3 or 4). Typically this is found by pressing the TV/Video button on the television's front panel or remote control. If there is more than one input channel, keep pressing TV/Video until you see the display from the Wii.
    • If you do not have a TV/Video button, then the input could be labeled something different. Some common input selects to look for on the TV or remote are: Input, Input Select, EXT, AUX, AV, or a channel such as 00 or 99.