How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Mike the Mac Medic Your Own Question

Mike the Mac Medic
Mike the Mac Medic, Consultant
Category: Networking
Satisfied Customers: 8694
Experience:  Network consultant for over 20 years.
25267123
Type Your Networking Question Here...
Mike the Mac Medic is online now
A new question is answered every 9 seconds

I have a Epson 410 all in one printer. cannot connect to

Customer Question

I have a Epson 410 all in one printer. cannot connect to computer or router.
Submitted: 1 year ago.
Category: Networking
Expert:  Kamil Anwar replied 1 year ago.

How are you trying to connect it wirelessly or wired? Thanks

Customer: replied 1 year ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Remote Tech Support. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Mike the Mac Medic replied 1 year ago.

Are you using a Mac or Windows computer?

Customer: replied 1 year ago.
windows Waiting an answer.
Expert:  Mike the Mac Medic replied 1 year ago.

Connect it by USB then go here and download this driver fro your system version:

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=224802&infoType=Downloads

Customer: replied 1 year ago.
Wireless. The 410 Epson does not have a port. Windows
Expert:  Mike the Mac Medic replied 1 year ago.

Of course it has a USB port. connector type USB 2.0; Wi-Fi (802.11b/g/n); Wi-Fi direct

You just plug it in by USB to set it up then you can use the Wireless.

Customer: replied 1 year ago.
We are not getting anywhere with my problem. I just purchased a new printer that will be installed today. Please credit my American Express card. Thank you
Expert:  Mike the Mac Medic replied 1 year ago.

All you had to do was plug it in.

Customer: replied 1 year ago.
It was plugged in. I am not stupid.
Expert:  Mike the Mac Medic replied 1 year ago.

You said there was no port?? I have sent your question to customer service