How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Quiksilver07070 Your Own Question

Quiksilver07070
Quiksilver07070, PC Technician
Category: Networking
Satisfied Customers: 727
Experience:  AAS degree, in Computer NETWORKING
63493917
Type Your Networking Question Here...
Quiksilver07070 is online now
A new question is answered every 9 seconds

I have an HP deskjet all in one wireless printer 3056A. My

Customer Question

I have an HP deskjet all in one wireless printer 3056A. My modem and router are working fine to get the internet up . But the blue wifi light is flashing on the PRINTER and I am unable to print or scan anything. I have pressed the button on the motorola
surfboard modem. The printer says it is connected to wifi but still no transmission between computer and printer. It takes the information to print but does not send the information to the printer. It puts up the bar but then closes it.
Submitted: 1 year ago.
Category: Networking
Expert:  Quiksilver07070 replied 1 year ago.

Hello and welcome to JA.

Did you install the drivers for the printer, on the PC you wish to print from?

Did you ADD the printer to windows?

Customer: replied 1 year ago.
it was working for many monthes then it just started blinking
Customer: replied 1 year ago.
It is not a new printerHP 3056a on windows 7. I tried pushing the wps button with the wifi connected but it still doesnt connect
Expert:  Quiksilver07070 replied 1 year ago.

power off your printer....pull the plug.

power off your wireless access point/router....pull the plug.

WAIT 15-30 seconds.

Power on the wireless.....wait 1-2 minutes.

Power on the printer.

Wait 1-2 minutes.

Try again.

Expert:  Quiksilver07070 replied 1 year ago.

Did you try the above?

Did it work?