I am an Information Technology Professional with over 15 years of professional experience. I am the technician assigned to your case today. I look forward to working with you and resolving this problem.
You can setup the wireless security on the router without the CD.On a computer that is connected to the router, perform the steps below:
- Click the following link ---> http://192.168.1.1
Leave the username blank
The default password ***** admin
(if that does let you in, use admin for the username and admin for the password)
- Click the Wireless link (your network name is ***** *****)
- Click the Wireless security link (your wireless password ***** ***** here)
--- On this page, choose WPA personal as the Security Mode.
--- Enter your choice of WPA Passphrase (This will be your wireless password).
- Click the Apply / Ok button to save the changes.
Now the WPA Passphrase will be needed when you connect a computer to the wireless signal.
Using the network name and password ***** you obtained from the instructions above, reconnect to the wireless signal.
I look forward to your next message or your rating below.
Please, do not forget to rate my help on this page.
Thank you again,