How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Claws224 Your Own Question

Claws224
Claws224, IEEE Network Engineer
Category: Networking
Satisfied Customers: 1256
Experience:  IEEE, Microsoft
5195814
Type Your Networking Question Here...
Claws224 is online now
A new question is answered every 9 seconds

Recently went from Frontier to Cableone service provider and

Customer Question

Recently went from Frontier to Cableone service provider and had to buy and install a new router--a Netgear N600. This is on a a network with 14 PCs and three Brother printers. The HL-5470BW prints fine from all PCs. The HL-2270 and HL-2170 will not print from any PC and are not found on the network--they have no IP address assigned. How can I get the router to assign IP addresses to these two printers?
Submitted: 1 year ago.
Category: Networking
Expert:  Jason Jones replied 1 year ago.





If anyone wishes to ask Jason a question directly,
they can do so at the following page: www.JasonFixedit.com

Hello,
I am an Information Technology Professional with over 15 years of professional experience. I am the technician assigned to your case today. I look forward to working with you and resolving this problem.
How are the printers connected to the network? (with an Ethernet cable or wirelessly)
I will be standing by.
Thank you,
Jason