Have changed modem so need ethernet port on computerHave connected roloand vp540 to lan 2 on netgear cg3000 light is red and printer not workingHow do i configure it
Hi, I’m a moderator for this topic and I wonder whether you’re still waiting for an answer. If you are, please let me know and I will do my best to find a Professional to assist you right away. If not, feel free to let me know and I will cancel this question for you. Thank you!
I have not heard from anyone yet and the problem has not been solved
Sometimes, finding the right Professional can take a little longer than expected and we thank you greatly for your understanding. We’ll be in touch again shortly
Greetings,Welcome to Just Answer.My name is XXXXX XXXXX X will be the expert working with you today to help resolve your problem. Do you still need help with this problem? If so, may I remote into your computer and help you resolve the problem? I will send a remote link within minutes after your response, so please keep refreshing the page.Thank you.
Hi Jason,I still have this issue I look forward to hearing from youThank you
Thank you.How many devices are on your network that can access the Internet through the Netgear router?
only one my pcmy old set up was internet connected to modem via usb port and printer connected via ethernet portnew set up pc connected to netgear cg3000 wireless through ethernet port. Printer connected to Lan 2 on netgear. port light is read and I cannot print to the printer
When you print the computer into the Netgear, is the port light also red?Please, use a different ethernet cable and plug the printer into the router. Is the color still red?Remember, if for any reason you are unsatisfied with my answer, we can continue the conversation until you’re satisfied and Accept my answer. I can address follow up questions at no extra charge and I’m always here to help. Thank you for using JustAnswer!
I am not sure if you undrstand what i am sayingwith the current set up i cannot see the printer it says device not connectedI just want to be able to print
I understand. A red light, typically means that the device is not connecting correctly. Thank you for the update.May I please, remote into your computer so that I can better help you resolve this problem?
ok what do i need to do
Thank you.Please, click the following link and allow the remote app to run: http://67.192.95.188:8040/?Session=819fbde1-08de-468b-a8e6-80d89544b0c9&SUPPORT=NET
I apologize.That last link has expired.When you have completed the instructions, please, let me know and I will post a new link.
If you are satisfied, you may leave any feedback for me that you feel is appropriate.Thank you,- JasonIf you ever want to work with me as your expert in the future, you can bookmark/favorite the following site. You can do so by right clicking the following link and choose "Add to Favorites" or "Add as bookmark", if you do wish to save it: http://www.justanswer.com/computer/expert-theextraordinaire/ Remember, if for any reason you are unsatisfied with my answer, we can continue the conversation until you’re satisfied and Accept my answer. I can address follow up questions at no extra charge and I’m always here to help. Thank you for using JustAnswer!