How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask NetworkTech Your Own Question

NetworkTech, Certified Networking Engineer
Category: Networking
Satisfied Customers: 5962
Experience:  Networking certificate from Cisco.Microsoft certifed professional.Degree in computer engineering.
Type Your Networking Question Here...
NetworkTech is online now
A new question is answered every 9 seconds

I have a netgear wireless-G router wgr614v9 and need to reset

Resolved Question:

I have a netgear wireless-G router wgr614v9 and need to reset password. I forgot mine and need it for i0pod.
Submitted: 7 years ago.
Category: Networking
Expert:  NetworkTech replied 7 years ago.
Hi there,

Follow the steps below:-

Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
2. Release the button.
3. Wait for the router to reboot.
4. Log in with the default password.

If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.
5. Unplug the router's power.
6. Press and hold the reset button. While the button is held down, reconnect router's power.
7. Continue to hold the reset button for 20 seconds after reconnecting the power.
8. Wait for the router to reboot.
9. Log in with the default password.

P.S:-The default username is admin and the password XXXXX XXXXX password or 1234. Try these before resetting the router.

Hope this helps.

best regards,
NetworkTech and 2 other Networking Specialists are ready to help you