How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Russell H. Your Own Question

Russell H.
Russell H., Computer Repairer
Category: Computer Hardware
Satisfied Customers: 185
Experience:  Working to keep PC-type computers working since 1988.
13568747
Type Your Computer Hardware Question Here...
Russell H. is online now
A new question is answered every 9 seconds

I am trying to install an Asmedia 106X controller board. The

Customer Question

I am trying to install an Asmedia 106X controller board. The 1061 drivers install and I see them in Windows 10 device manager. The entry under IDE ATA/ATAPI controllers is STANDARD SATA AHCI Controller. When I shutdown and plug in two SAMSUNG SSD into the controller no drives are visible anywhere. I am trying to setup RAID 0 using the card and the drives attached to it.
Submitted: 1 year ago.
Category: Computer Hardware
Expert:  arsufi2002 replied 1 year ago.

Hi,

My name is***** am sorry to hear that you have this issue, I look forward to assisting you today with your question and providing the best answer possible.

Please save this page to favorites( ctrl + d) so that you can reconnect in case you get disconnected

Expert:  arsufi2002 replied 1 year ago.

By the way, have you checked in DiskManagement

Customer: replied 1 year ago.
I have checked disk management and the drives do not appear
Customer: replied 1 year ago.
Here is some more info. My MB is the ASUS MAXIMUS V EXTREME the BIOS is V 1903 nothing I have seen in the BIOS indicates that the card is installed.
Customer: replied 1 year ago.
Is this a chat session?
Customer: replied 1 year ago.
Is anyone there?
Expert:  arsufi2002 replied 1 year ago.

Hi,

Expert:  arsufi2002 replied 1 year ago.

Are you there

Customer: replied 1 year ago.
I am here are you ready to help with my problem
Customer: replied 1 year ago.
please respond
Expert:  arsufi2002 replied 1 year ago.

yes..

Expert:  arsufi2002 replied 1 year ago.

hope Asmedia 106X controller is connected now

Customer: replied 1 year ago.
Then let's get started
Customer: replied 1 year ago.
the controller is in pcie slot and drives are connected
Expert:  arsufi2002 replied 1 year ago.

Would you please open Device Manager and tell me the devices under IDE ATA/ATAPI controller section

Customer: replied 1 year ago.
it is showing standard standard ACHI controller
Customer: replied 1 year ago.
that is all that is liested
Expert:  arsufi2002 replied 1 year ago.

Is there other devices section in Device Manager

Customer: replied 1 year ago.
storage controllers show Asmedia 106X SATA Controller drivers which I loaded yeasterday
Expert:  arsufi2002 replied 1 year ago.

Can i start a remote session with your computer

Customer: replied 1 year ago.
THe 106X card is not showing as a device as far as I can see. THe drives connected do not show up either. I do not see the BIOS pick it up. MY motherboard is ASUS Maximus V extreme
Customer: replied 1 year ago.
you may start a remote session
Expert:  arsufi2002 replied 1 year ago.

please download and install tool from below link

http://www.justanswer.com/remotedesktop/join.aspx?Session=18847720-620b-461e-89e9-6bcb83dbb0f3

Procedure:

1: Click Above link

2: Click I Agree button

3: Click Download

4: Double click downloaded file to run

Expert:  arsufi2002 replied 1 year ago.

Dear sir,

I was working in mid night and due to days tiredness fell asleep while working with you . That's why you got any response on last session. Sorry for that.

Just checking if you still wish to continue with the process.

Thanks

Expert:  arsufi2002 replied 1 year ago.

Dear sir,

I was working in mid night and due to days tiredness fell asleep while working with you . That's why you got any response on last session. Sorry for that.

Just checking if you still wish to continue with the process.

Thanks