Clock Repair Questions? Ask a Clock Technician for Answers ASAP
Hi, My name is ***** ***** it is my pleasure to assist you. How are the hands attached to your clock?. There are several ways 1) By a screw cap, 2) a pin that goes through the end of the shaft, 3) Hands are pressure fitted onto the shafts. Thanks Mike
Hi, If the hands are pressure fitted onto there shafts and are loose you will have to use equal pressure to both sides at the base of the hands. On each side of the hand push them down onto there shafts to tighten the hands back up. From moving the hands many times it probably loosened them up slightly to where they do not have good contact on there shafts. Try this option and let me know what happens. Thanks Mike
If you need further assistance, please don't hesitate to ask.PLEASE remember if you're satisfied with my answer rate my answerusing the stars so I will be compensated by JustAnswerfor helping you.
Hi, I was wondering if you need further assistance with your clock? Thanks Mike
PLEASE remember if you're satisfied with my answer rate my answerby using the stars so I will be compensated by JustAnswerfor helping you.