Recent Feedback
I have an old Gustav Becker spring powered wall clock.The gear controling the Westminster chimes has worn out with several teeth broken off. The gear has 77 teeth and is about 1.077in diam or 27.3mm.It is about .038in or .99mm thick.It is part of an assembly with a shaft and a small spur gear both of which are ok. Where might I be able to find a replacement gear ?
Already Tried: Looking on the internet.
Hi! Wayne, My name is XXXXX XXXXX it is my pleasure to assist you. You can order your part from one of the companies I use to order parts from they are all quite reliable.The phone works the best for ordering your parts. Just give them the make and model of your clock and the movement number which should be located on the back of the movement. One of these companies should have the gear you need. Try Back in Time first then R&M Imports next. Thanks Mike
Clockparts.com 11869 Teale Street Culver City, CA 90230 USA Toll free: 1-888-8CRAFTSHours: Monday to Friday, 8AM to 4PM PST
Timesavers.comBox 12700 Scottsdale, AZ 85267 U.S.A.1-800-552-1520 1-480-483-3711Fax: 1-480-483-6116Monday through Friday Hours: 8:00 am - 4:00 pm (MST)
Norkro.com2209 NW Mill Pond Rd. Portland Or 97229 order line: 1-800-566-7576Phone/fax:(NNN) NNN-NNNN/p>
Clockworks.com PO Box 339 -XXXXXbr/>Huntington MA 01050800-381-7458
Back In Time Clock Repair & Restoration345 North 4th StreetSouderton,Pa.18964Phone(NNN) NNN-NNNN/p>
Mount Vernon Clock XXXXXXXXXX@XXXXXX.XXX or by phone at(NNN) NNN-NNNN
Ronell Clock CompanyP.O. Box 5510Grants Pass, OR 97527
1(800)(NNN) NNN-NNNNbr/>R & M Imports P.O. Box 60 Harveysburg, OH 45032 USA Phone(NNN) NNN-NNNNFax(NNN) NNN-NNNN/p>
If you need further assistance, please don't hesitate to ask.PLEASE remember to click the ACCEPT button if you're satisfiedwith my answer so I will be compensated by JustAnswer for helping you.There is no additional fee charged for my services.
Experience: I've been active in clock repair for 11 years NAWCC member