How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask K. Wiggins Your Own Question
K. Wiggins
K. Wiggins, Classic Car Mechanic
Category: Classic Car
Satisfied Customers: 2515
Experience:  AA in Auto Tech, Classic car restorer and enthusiast
68360881
Type Your Classic Car Question Here...
K. Wiggins is online now
A new question is answered every 9 seconds

I have a 94 camaro that I have stroked to a 396. I 'm

Customer Question

I have a 94 camaro that I have stroked to a 396. I 'm getting a 043 code which is the knock sensor.I'm going to check for 5 v at the connector then remove the wire from the knock sensor to see if will stop retarding the timing.What do you think?
Submitted: 1 month ago.
Category: Classic Car
Expert:  K. Wiggins replied 1 month ago.

That's the way to begin the test. I'll post the rest below so you'll know which way to go depending on voltage. If I can help further just reply back.

Sounds like a nice build.

Related Classic Car Questions