How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Classic Car Service Your Own Question
Classic Car Service
Classic Car Service, Classic Car Mechanic
Category: Classic Car
Satisfied Customers: 4632
Experience:  ..................
14892859
Type Your Classic Car Question Here...
Classic Car Service is online now
A new question is answered every 9 seconds

64 ford ranchero with L6. Just had work done, with all

Customer Question

64 ford ranchero with L6 . Just had work done, with all bushings replaced. I think they repalced the steering too. Now i cant make low speed tight turns. it's like only one wheel turn the other stays straight. Shop said its a telemetry problem...Im at a loss.
Submitted: 7 months ago.
Category: Classic Car
Expert:  Classic Car Service replied 7 months ago.

Hello. Welcome to Just Answer. Please allow me to assist you. When you say you cannot make a low speed turn, do you mean the steering wheel will not turn? Also, when straightening up after the turn, does the steering wheel return to center easily, or, do you have to assist centering the steering wheel to go straight again? Thanks

Customer: replied 6 months ago.
Sorry I couldn't reply yesterday, I had to work til late. I jacked it up today, and turned the wheel to the left and right stops. Then measured the angle on both tires. My left tire has full range, my right tire has about half the range. But it's not hitting anything.
To answer your questions. The steering wheel turns. I have to assist the steering back to center.
The shop did change all the bushings. They also changed the spindles said it had v8 spindles, so they changed it back to the proper ones. I think they changed the steering column too, but I'm not sure.
I really appreciate any help you can give.Thanks,
JoshI took some pics too, if that would help...I can only add one pic, sorry...
Expert:  Classic Car Service replied 6 months ago.

If one side wheel will not turn all of the way it may be: A: wrong spindle. B: Incorrect outer tie rod or improper tie rod setting. A good alignment shop would see this.

Customer: replied 6 months ago.
Ok. Thanks. I'll give it a shot.
Expert:  Classic Car Service replied 6 months ago.

Ok

Related Classic Car Questions