How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bluegorilla Your Own Question
Bluegorilla
Bluegorilla, Technician
Category: Classic Car
Satisfied Customers: 29427
Experience:  11 years as GM technician.
10949255
Type Your Classic Car Question Here...
Bluegorilla is online now
A new question is answered every 9 seconds

Chevrolet C10 4x2: I am trying to put some seats out of a 2008

Customer Question

I am trying to put some seats out of a 2008 Chevy truck in a 71 model they have power I'm trying to get the the back to move and get the the seat to move back and forth
Submitted: 1 year ago.
Category: Classic Car
Customer: replied 1 year ago.
I just want to know how to get the motors to work
Expert:  Bluegorilla replied 1 year ago.
WElcome. I am CAm. On your power seats out of the 2008, you have how many wires in there?
Expert:  Bluegorilla replied 1 year ago.
It should have several wires but the ones we need are the thick red and the thick black. This is for the simple 6 way power seats. with these 2 wires connected, black to ground and the red to 25 amp circuit breaker or fuse, the seats will function.
Expert:  Bluegorilla replied 1 year ago.
If the donor seats have the memory functions then you will find 2 reds and 2 blacks, but the reds can be connected to the same source and blacks to ground.

Related Classic Car Questions