Here are some of the specifications on the vehicle. I will have to search for the exact tune up specs for you. PLEASE STAND BY !

1967 Fiat Dino Coupé 2.0 data bodywork
Body type 2+2 seater fixed-head coupé
Number of doors 2
Designer Bertone
dimensions & weights
mm inches
Wheelbase 2550 100.4
Front track 1379 54.3
Rear track 1361 53.6
Length 4514 177.7
Width 1709 67.3
Height 1318 51.9
Ground clearance
length:wheelbase ratio 1.77
Kerb weight 1220 kg 2690 lb
Weight distribution
Fuel tank capacity 65.9 litres 14.5 UK Gal 17.4 US Gal
aerodynamics
Drag coefficient
Frontal area
CdA
engine
Engine manufacturer Fiat
Engine code
Number of cylinders V 6
Capacity 2 litre
1987 cc
(121.254 cu in)
Bore × Stroke 86 × 57 mm
3.39 × 2.24 in
Bore/stroke ratio 1.51
Valve gear DOHC
2 valves per cylinder
12 Total valves
max power
(Net) 162.2 PS (160 bhp) (119.3 kW)
at 7200 rpm
Specific output
(Net) 80.5 bhp/litre
1.32 bhp/cu in
max torque
(Net) 172 Nm (127 ft·lb) (17.5 kgm)
at 6000 rpm
Specific torque
(Net) 86.56 Nm/litre
Engine construction
sump
compression ratio 9:1
Fuel system 3 We carbs
brake mean effective pressure 1087.8 kPa (157.8 psi)
Maximum RPM
Number of crankshaft bearings
Engine coolant Water
Cylinder volume 331.17
Aspiration Normal
Compressor N/A
Intercooler None
Catalytic converter N
performance

0-80km/h
0-60mph
0-100km/h
0-100mph

Standing quarter-mile
Standing kilometre
Maximum speed 200 km/h (124 mph)
Power-to-weight ratio 131.15 bhp/ton
fuel consumption
Fuel consumption
Carbon dioxide emissions
Carfolio Calculated CO2 ?
chassis
Engine position front
longitudinal
Drive wheels rear wheel drive
Steering worm & roller
Number of turns lock-to-lock
Turning circle 11.60 m
Front suspension I.CS.W.
Rear suspension LA.SE.RA.PR.
Wheel size front
Wheel size rear
Tyres front
Tyres rear
Brakes F/R Di/Di
Front brake diameter
Rear brake diameter

Gearbox 5 speed manual
Top gear ratio
Final drive ratio
general
Carfolio.com ID 770
Number made
Model code
Model family
RAC rating 27.5
Insurance classification No information available
Tax band No information available
1967 Fiat Dino Coupé 2.0 added before December 1995.
Last modified 2008-08-22.

Sincerely,

Dale

Here are some additional Key Facts about your vehicle:

What body style?fixed-head coupé with 2+2 seatsHow long?4514 mmHow heavy?1220 kgWhat size engine?2 litre, 1987 cm3How many cylinders?6, VHow much power?162.2 PS / 160 bhp / 119.3 kW @ 7200 rpmHow much torque?172 Nm / 127 ft.lb / 17.5 kgm @ 6000 rpmHow fast?200 km/h, 124 mph

The data base show (2) models. One is the 124 Model and the other is a 850 Model. I choose the 124 for these specs. If it is the 850 please let me know.

Removal & Installation
Points should be replaced, not filed.

1.Remove the distributer cap and rotor.

2.Then disconnect the wires attached to the points; one from the condenser and the other from the distributor.

3.Remove the points and condenser attaching screws. When installing, be sure that the breaker arm is in contact with the high point on the distributor cam lobe. In this position, proper gap adjustment can be obtained.

Adjustment

Dwell angle is the most efficient way to adjust points but can only be done with a dwell meter. See "Tune-Up Specifications Chart" for proper dwell angle.

Here is your link to the Tune Up Specs thenselves:

Click Here> http://content.chiltonsonline.com/content/images/5872/images/5872_FARM_c2035.pdf

NOTE: I WILL NEED TO KNOW WHICH MODEL BEFORE I CAN SEND THE FIRING ORDER PICTURE ! PLEASE ADVISE!

Dale