How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 21585
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

My 2008 chrysler aspen want turn over at all or try to turn

Customer Question

My 2008 chrysler aspen want turn over at all or try to turn over. Lights come on.
JA: Just to clarify, what are the exact lights you're talking about?
Customer: The lights on the dash work but car want to anything
JA: Are you fixing your Aspen yourself? What have you tried so far?
Customer: I tried in booking the battery, putting it in neutral aand starring it..
JA: Anything else you want the mechanic to know before I connect you?
Customer: Un hooking
Submitted: 25 days ago.
Category: Chrysler
Expert:  sprinkles08 replied 25 days ago.

Hello and welcome to JustAnswer!

There are many things that will cause a no crank condition and it may take some electrical testing to determine what is going on. The problem could be with the SKIM system, ignition switch, the starter, powertrain control module, wiring, the transmission range sensor, it could simply be a dead battery.

Is there any noise from the engine compartment when turning the key to the crank position?

Related Chrysler Questions