How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22286
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

My Chrysler Sebring Touring 2007 will not come out of park,

Customer Question

My Chrysler Sebring Touring 2007 will not come out of park
JA: Do you have brake lights? Have any trouble codes popped up?
Customer: Yes I have brake lights and there are no trouble codes
JA: What is the make/model of your car?
Customer: 2007 Sebring Touring sedan
JA: Are you fixing your Sebring yourself? What have you tried so far?
Customer: I have had it repaired but I think I got hosed
JA: Anything else you want the mechanic to know before I connect you?
Customer: I don't thik so
Submitted: 5 months ago.
Category: Chrysler
Expert:  Peter Bagley replied 5 months ago.

Hello and welcome to just answer. I value your input to my questions so I can help you better.Have you located the shift lock bypass and released it that way?

Customer: replied 5 months ago.
Customer: replied 5 months ago.
I have located the bypass and it will release so it cold have been driven unfortunately the dealer neglected to tell me that so I had to have I towed to his shop where he replaced the shifter for a the sum of $596.00
Expert:  Peter Bagley replied 5 months ago.

ouch That was not nice ,besides if they replaced the whole shiftier that was a grab too because all you probably needed was the shift lock solenoid for under $100 I bet you didn't ask to see the part and have them explain why they replaced the complete shiftier did you? So I assume every thing is ok now?

Expert:  sprinkles08 replied 5 months ago.

Hello and welcome to JustAnswer!

The shifter was replaced because the plastic ignition interlock arm was broken. The arm is plastic and spring loaded, under constant tension against the interlock cable. The small hook where the spring connects to the arm will break and prevent moving the shifter from park because it doesn't think the ignition is in the run position.