How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 21571
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2009 sebring 4cyl. abs and unable to communicate through

Customer Question

2009 sebring 4cyl. abs and unable to communicate through aldl, shows error, no found open fuses.
Submitted: 1 month ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 month ago.

Hello and welcome to JustAnswer!

If a scan tool won't communicate with the ABS module then the module is either down due to an internal failure or a loss of power or ground, or there may be a bus wiring issue with the ABS module; assuming it's actually equipped with ABS.

What is the problem you're trying to diagnose?

Customer: replied 1 month ago.
Abs and check engine light are on. No check engine light codes. Reads ERR.
Expert:  sprinkles08 replied 1 month ago.

If the engine light is on then there are codes in the PCM or the PCM isn't communicating with the instrument cluster.

What are you using to try to check for codes?

Related Chrysler Questions