How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim's Auto Repair Your Own Question
Tim's Auto Repair
Tim's Auto Repair, Mechanic
Category: Chrysler
Satisfied Customers: 15775
Experience:  Have owned a repair shop for 25 yrs.
14541291
Type Your Chrysler Question Here...
Tim's Auto Repair is online now
A new question is answered every 9 seconds

2002 pt cruiser stalls and won't start for awhile 4 codes

Customer Question

2002 pt cruiser stalls and won't start for awhile 4 codes came up p0725 p0340 p0700 p1391 changed cam sensor still no luck
Submitted: 6 months ago.
Category: Chrysler
Expert:  david craig replied 6 months ago.

Hi Im David, thanks for visiting the site. please allow me a moment to look up some information for you. thanks

Expert:  david craig replied 6 months ago.

P0700 CHRYSLER - Transaxle Control System Malfunction

P0725 CHRYSLER - Engine Speed Sensor Circuit

P0340 CHRYSLER - Camshaft Position Sensor Circuit Bank 1 Sensor 1
P1391 CHRYSLER - CMP or CKP Signal Intermittent Condition

Customer: replied 6 months ago.
I already new that that's why I changed the cam sensor with no luck it still stalls going down the road thought maybe I would get an answer to what the problem was
Expert:  david craig replied 6 months ago.

im not done. im just letting you know the faults. thank you.

Customer: replied 6 months ago.
Ok thanks
Expert:  david craig replied 6 months ago.

first of all why did you replace the cam sensor? because of the code? you need to find out if a part is bad before you replace it. you're wasting money by not finding out if the sensor is bad.

Customer: replied 6 months ago.
That was the first thing I thought it would have been
Expert:  david craig replied 6 months ago.

ok.

Expert:  david craig replied 6 months ago.

all of these codes come down to the crankshaft position sensor be faulty. remove the crankshaft sensor clean it off, check the condition of the connector and wiring. read the resistance of the sensor and let me know what it is. do not reinstall it until i let you know if the reading is good or not.

Customer: replied 6 months ago.
Thank you I will get to you tomorrow night thanks
Expert:  david craig replied 6 months ago.

you're welcome

Expert:  david craig replied 6 months ago.

do you still need assistance?

Expert:  david craig replied 6 months ago.

hello??

Expert:  david craig replied 6 months ago.

checking in to see how its going

Expert:  Tim's Auto Repair replied 6 months ago.

Hi, My name is ***** ***** for the delay.

I will do my best to assist you.

Parts InformationOEM Part #Price

Crankshaft Position Sensor

Crankshaft Position Sensor

(###) ###-#### $129.00

Labor InformationSkill LevelMfg. WarrantyStandard

Replace Crankshaft Position Sensor

B 0.2 - 0.4 labor

i would think your problem here is a bad crank sensor,cleaning it may not hel.i think it is breaking down when it gets hot

PLEASE COPY AND PASTE the link below to your browser, I have uploaded more info on this there.please copy and paste the link below to your main browser[INTERNET EXPLORER ,Chrome or Firefox.]

.

https://www.dropbox.com/s/ccra4fljwbsan1r/1027-pt-Fig.doc?dl=0

.

if the link doesn’t work that way, try it this way

thanks

.

www.dropbox.com/s/ccra4fljwbsan1r/1027-pt-Fig.doc?dl=0

.

If you are satisfied with my answer, Please Rate my answer by clicking the rating button so I can get credit for my work. I’m not always going to be giving you good news, so please don't let this stand in the way of you accepting my answer. .it does not cost you more money and we will still be able to communicate, ,.please understand, i can not see, hear or touch the vehicle and only know what you tell me. Bonuses and positive feedback are appreciated.. if you are not satisfied with my answer, please do not leave bad feed back ,i will gladly opt out and let another expert handle the question. .if i have sent any diagrams, please print them. .sometimes you may need to right click the image [,then save picture as]to save it to your computer so you can open it with your picture program...Please ask if you need more help