How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 21432
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

After replacing the wiring for the sliding power door on a

Customer Question

After replacing the wiring for the sliding power door on a 2001 town and country, none of the power doors will work, the instrument panel wont light up, and it wont start. It turns over, but won't start.
JA: Have you checked the fuses? Have you checked the door switches?
Customer: not the door switch, I don't know what that is.
JA: Are you fixing your Town and Country yourself? What have you tried so far?
Customer: we replaced the wiring for the passenger side sliding door. It seemed simple just unplug the old and plug in the new. after replacing the wiring, none of the power doors would work and the van would not start. We disconnected the cables to the battery and replaced them after about three minutes. We also checked fuses.
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 1 month ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 month ago.

Hello and welcome to JustAnswer!

There are quite a few things that you could have going on and it's going to take some electrical testing to determine the cause. If the problems are all related it may be a front control module, integrated power module or ignition switch issue, but the problems may not be related.

Does the fuel pump run when the key is turned on?

Related Chrysler Questions