How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad
Brad, Dealership Technician
Category: Chrysler
Satisfied Customers: 6961
Experience:  19 Yrs Chrysler/Dodge Technician..ASE Master Certified(L-1)
10114124
Type Your Chrysler Question Here...
Brad is online now
A new question is answered every 9 seconds

Disable seat belt alarm 2012 town & country, when not

Customer Question

disable seat belt alarm 2012 town & country
JA: Which belt is acting up? And when was it last changed?
Customer: when not wearing seat belts i want the alarm disabled
JA: Are you fixing your Country yourself? What have you tried so far?
Customer: if I knew what to do I would fix it myself
JA: Anything else you want the mechanic to know before I connect you?
Customer: any history of transmission problems on 2012 town & country
Submitted: 2 months ago.
Category: Chrysler
Expert:  Brad replied 2 months ago.

Welcome to JustAnswer!!! My name is***** will be helping you with your question today...

Expert:  Brad replied 2 months ago.

To disable the seatbelt minder, follow these steps:

STANDARD PROCEDURE - ENHANCED SEATBELT REMINDER
PROGRAMMING
The seatbelt indicator also includes a programmable enhanced seatbelt reminder or BELTMINDER feature that is enabled
when the vehicle is shipped from the factory. This BELTMINDER feature provides extended and modified visual seatbelt
indicator and audible chime warning responses to an unbuckled driver side front seat belt. The BELTMINDER feature may
be disabled or enabled by the customer using the programming sequence that follows, or by the dealer using a diagnostic
scan tool.
CUSTOMER PROGRAMMING SEQUENCE
NOTE: The following sequence of events must occur within 60 seconds of the ignition switch being placed in the
ON position in order for the programming to be completed successfully.
1. With all doors closed and the ignition switch in any position except ON or START, buckle the driver side front seat
belt.
2. Turn the ignition switch to the ON position and wait for the seatbelt indicator reminder function to conclude (about
six seconds).
3. Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.
4. Turn the ignition switch to any position except ON or START to toggle the BELTMINDER feature from its
current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible
confirmation that the programming sequence has been successfully completed.

If you need anymore assistance feel free to reply and don't forget the RATING before leaving the site!!

Have a great day,

Brad

Expert:  Brad replied 2 months ago.

Do you need more help? If not don't forget to RATE so I'm credited for helping.

Brad

Expert:  Brad replied 2 months ago.

Hello? Are you still here?

Expert:  Brad replied 2 months ago.

I see you haven't rated yet which means I have not been credited for helping. Don't forget to honor your good faith deposit by rating my assistance..

Thank you and have a great day,

Brad

Expert:  Brad replied 2 months ago.

Ken I see that you have read my replys, can you tell me if your having problems rating?

Expert:  Brad replied 2 months ago.

Ken can you reply and let me know whats going on?

Expert:  Brad replied 2 months ago.

I'm not credited for helping unless you leave a positive rating. I did my part and explained what you need to do to repair our vehicle and I would greatly appreciate a positive rating..

Thanks,

Brad

Related Chrysler Questions