How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 21586
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2008 Chrysler sebring 2.7 HT convertible. Can't get heat,

Customer Question

2008 Chrysler sebring 2.7 HT convertible. Can't get heat, just ac blowing. checked actuators (blend doors) and both seem to be working (can visually see both move when I move the dials). Both heater lines hot ac heater core, but only cool air coming out vents.
Submitted: 3 months ago.
Category: Chrysler
Expert:  sprinkles08 replied 3 months ago.

Hello and welcome to JustAnswer!

If the blend door is actually moving when turning the temperature dial yet you don't have heat and the engine is reaching operating temperature then you have a restricted heater core, not uncommon. You can try flushing it out and may see a small improvement for a short time, but if the heater core is restricted the permanent repair is going to be replacement.

Related Chrysler Questions