How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22280
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Dont work speed control, Grand vojager 3.3 1995, 1995,

Customer Question

Dont work speed control
JA: What is the model/year of your Chrysler?
Customer: Grand vojager 3.3 1995
JA: What year is your Chrysler?
Customer: 1995
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Change engine control modul, gearbox control modul, vacum chamber, tested brake switch
JA: How many miles are on the car? Is it an automatic or a manual transmission?
Customer: 200000, automatc
JA: Anything else you think the mechanic should know?
Customer: ECM and vacum chamber was burned
Submitted: 8 months ago.
Category: Chrysler
Customer: replied 8 months ago.
waiting for answer!>?
Customer: replied 8 months ago.
earlier conversation was ---
Dont work speed control
JA: What is the model/year of your Chrysler?
Customer: Grand vojager 3.3 1995
JA: What year is your Chrysler?
Customer: 1995
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Change engine control modul, gearbox control modul, vacum chamber,tested brake switch
JA: How many miles are on the car? Is it an automatic or a manual transmission?
Customer: 200000, automatc
JA: Anything else you think the mechanic should know?
Customer: ECM and vacum chamber was burned
Customer: replied 8 months ago.
Knobs and film on steering wheel is ok
Expert:  sprinkles08 replied 8 months ago.

Hello and welcome to JustAnswer!

There are many things that will prevent cruise from working. It sounds like you had heat damage to the servo though, and if that's the case then it may have damaged the drivers in the powertrain control module that control the build and decay solenoids.

The first step in diagnosing the problem is to see if any fault codes are setting. Do you know if any codes are currently setting/