How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 35319
Experience:  #@ years in the Automotive repair field.
7276279
Type Your Chrysler Question Here...
Ron is online now
A new question is answered every 9 seconds

Bill, 99 chrysler LHS 3.5 - engine stalls intermittently and

Customer Question

Hey Bill, 99 chrysler LHS 3.5 - engine stalls intermittently and hard to start after it ges hot. Code PO340. Cam shaft sensor signal fault. checked supply voltage and ground at both cam and crank sensors. monitered voltage and RPM signal on scan tool during no start. Crank shaft not present, RPM fixed at 320rpm even after starting. Replaced both Cam sensor and Crank sensor and issue still exists.
Submitted: 11 months ago.
Category: Chrysler
Expert:  Ron replied 11 months ago.

Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.

The code P0340 can be set due to any of the following,

Related Chrysler Questions