How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 518
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

What could be the problem, when i turn on my A/C it blows

Customer Question

What could be the problem, when i turn on my A/C it blows cold on the passenger side and hot on driver side, 2007 Sebring
Submitted: 10 months ago.
Category: Chrysler
Expert:  david craig replied 10 months ago.

Hi Im David , there can be 2 reasons. low on refrigerant or a blend door actuator for the driver side is bad.

Customer: replied 10 months ago.
If it's the blend door is that hard to replace
Expert:  david craig replied 10 months ago.

some of them are really difficult. let me look it up and i will get back to you

Expert:  david craig replied 10 months ago.

yea, yours would be a nightmare, but knowing chryslers the actuators hold up pretty well so im thinking its just a low charge. very common to blow cold on one side with not enough refrigerant