How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask tracer5 Your Own Question
tracer5, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 12728
Experience:  ASE Master Certified, L1, Shop Owner, Foreign and Domestic
Type Your Chrysler Question Here...
tracer5 is online now
A new question is answered every 9 seconds

My windshield wipers are not working, i was told there

Customer Question

my windshield wipers are not working
JA: Have you checked the fuses? Do you know if there is power to the wiper motor?
Customer: i was told there aren't any fuses for the wipers
JA: What is the model/year of your Chrysler?
Customer: 2007 PT
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: looking at the fuses
JA: Anything else you think the mechanic should know?
Customer: they are not coming on when I turn the switch
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Chrysler Mechanic about your situation and then connect you two.
Submitted: 3 months ago.
Category: Chrysler
Expert:  tracer5 replied 3 months ago.

Hello, do the washers work? do you have rear wiper? does it work?

Customer: replied 3 months ago.
Yes! yes the rear works also.
Expert:  tracer5 replied 3 months ago.

I doubt the switch, rare for them to fail and lose all front wiper operations, There is not a fuse, It all is incorporated into the TIMP module under the hood, yes, those modules do fail, You can online search TIMP PT Cruiser and gather all sorts of info on the module, so,, step one would be to remove the wiper arms, remove the cowl covers, unplug the motor, turn key on, wipers on, check for power, if power? then motor has failed, no power? I lean to the TIMP

Customer: replied 3 months ago.
Okay, thanks I'll check that then respond to you shortly
Expert:  tracer5 replied 3 months ago.


Customer: replied 3 months ago.
The blades moved just a hair I heard the motor for a second
Expert:  tracer5 replied 3 months ago.

when? how? what were you doing? you said they did not work at all, LMk thanks