How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 510
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

2001p.t cruiser I have put trans.cluth kit cylinder master

Customer Question

2001p.t cruiser I have put trans.cluth kit slave cylinder master cylinder put one cable bushin on trans.lever ,I bleed the slave cylinder until no bubbles .then I pump the cluth 20 times then bleed it through the slave clinder its hard to shift sometimes to 1sts gear then to 2nd gear it wont shift . it grinds so I throw it 3rd it goes in smooth and 4 do I have to adjust a cable or what . need ur help would really appreciate it
Submitted: 5 months ago.
Category: Chrysler
Expert:  roybelding replied 5 months ago.

good morning my name is ***** ***** I will assist

you still have air in the system. I know it is a pain but you need to bleed it more.

I would gravity bleed it again, for a bit then see what the pedal feels like.

Roy

Related Chrysler Questions