How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask john -aka eauto Your Own Question
john -aka eauto
john -aka eauto, The Car Guy
Category: Chrysler
Satisfied Customers: 15758
Experience:  15 years as a auto tech ASE certified
6149662
Type Your Chrysler Question Here...
john -aka eauto is online now
A new question is answered every 9 seconds

2008 Chrysler Aspen. 5.7L. All warning lights come on, tach

Customer Question

2008 Chrysler Aspen. 5.7L. All warning lights come on, tach and speedometer quit, all at same time. Engine keeps running air still works. Turn signals will not work. As you keep driving the warning lights go out speedometer and tach start working. Everything is back to normal. If you stop the engine while eveything is screwey it will not start. The starter will not engage. I have checked for loose connections. I am an electronics tech by trade but I do not know these newer cars. The first thing I thought of was maybe a bad ignition switch. These newer cars probably don't have one of these on the steering colum
Submitted: 11 months ago.
Category: Chrysler
Expert:  john -aka eauto replied 11 months ago.

have you checked charging voltage?

Customer: replied 11 months ago.
Charging voltage is 14.1vdc
Expert:  john -aka eauto replied 11 months ago.

likley a bcm issue..can you perform a module reset?

Customer: replied 11 months ago.
what is a bcm and where is it and how do you reset it? 2008 Chrysler Aspen 5.7L
Expert:  john -aka eauto replied 11 months ago.

body control module

Customer: replied 11 months ago.
cute. How is it reset. Do you have to have a diagnostic computer?
Expert:  john -aka eauto replied 11 months ago.

if you dont pull the positive and negative battery cable off the battery and touch the 2 terminals together for 45 seconds..that will reset all modules

Related Chrysler Questions