How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, Technician
Category: Chrysler
Satisfied Customers: 16110
Experience:  GM master tech for 15 years/ASE master tech for 20 years
19513769
Type Your Chrysler Question Here...
Gary is online now
A new question is answered every 9 seconds

2007 Chrysler pacific 3.8 engine torque to main bearing,

Customer Question

2007 Chrysler pacific 3.8 engine torque to main bearing, connecting
rods
Submitted: 8 months ago.
Category: Chrysler
Expert:  Gary replied 8 months ago.

mains are 30 LB FT then go 90 degrees

forged rods are 40 LB FT then go go 1/4 of a turn