How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric
Eric, Automotive Repair Shop Manager
Category: Chrysler
Satisfied Customers: 29985
Experience:  20+ years experience as automotive store manager and technician.
3195632
Type Your Chrysler Question Here...
Eric is online now
A new question is answered every 9 seconds

New wheel cylinders calipers & master cylinder still no

Customer Question

new wheel cylinders calipers & master cylinder still no brakes
Submitted: 5 months ago.
Category: Chrysler
Expert:  Chris replied 5 months ago.

Hello, and welcome to just answer. When you open up the bleeder screw and bleed a caliper or wheel cylinder, are you getting a good stream of brake fluid?

' Chris

Customer: replied 5 months ago.

still getting air tried different master cyl 5 bottles of fluid later

Expert:  Chris replied 5 months ago.

Ok, then if that is the case, your ABS Hydraulic Control Unit (HCU ) must be defective and is allowing air to get into the system. There is nothing else that could cause this. Replace the HCU and re bleed the system. Bleed the master cylinder first by cracking open the lines at the HCU. Then re bleed at each wheel. I sm pretty sure that wil take care of it.

Chris

Customer: replied 5 months ago.
Relist: Other.
inevergotananswer
Expert:  Eric replied 5 months ago.

HI,

I see you requested a new expert. I you still need help, please let me know

Related Chrysler Questions