How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad, Dealership Technician
Category: Chrysler
Satisfied Customers: 6767
Experience:  19 Yrs Chrysler/Dodge Technician..ASE Master Certified(L-1)
Type Your Chrysler Question Here...
Brad is online now
A new question is answered every 9 seconds

I am wanting to repair my front seat cushion covers and I

Customer Question

I am wanting to repair my front seat cushion covers and I want to know if I can remove my cushions without removing the seats ths nelson
JA: What is the model/year of your Chrysler?
Customer: 2007 town and country limited
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I am going to have a person sew new pieces vynle where they are cracked
JA: Anything else you think the mechanic should know?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Chrysler Mechanic about your situation and then connect you two.
Submitted: 4 months ago.
Category: Chrysler
Expert:  Brad replied 4 months ago.

Good morning and welcome to JustAnswer!!

My name is ***** ***** I have worked for a Chrysler-Dodge-Jeep dealership for 18 years and I will do my best to help.

Yes you can remove the seat covers without removing the seats, but if you wanted to remove them it would make the job easier.. Here is the factory directions:

.Remove seat cushion side covers, and leave connector connected, if equipped.

2.Remove seat track rear cover (if equipped)

3.If equipped, open storage bin to access front pan bolts.

4.Remove bolts attaching seat cushion pan to seat track.

5.Disconnect wire connectors, if equipped.

6.Remove seat cushion from seat.

7.Disengage J-strap retainers holding seat cover to cushion.

8.Remove seat cushion pan from cover and pad

If you need anymore assistance feel free to reply and don't forget the RATING before leaving the site!!

Have a great day,


Expert:  Brad replied 4 months ago.

I see you haven't rated yet which means I have not been credited for helping. Don't forget to honor your good faith deposit by rating my assistance..

Thank you and have a great day,


Expert:  Brad replied 4 months ago.


Related Chrysler Questions