How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask EricFromCT Your Own Question
EricFromCT
EricFromCT, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 3584
Experience:  ASE Master certified L1, L2, Diesel Certified 16 years experience
34559540
Type Your Chrysler Question Here...
EricFromCT is online now
A new question is answered every 9 seconds

I have a 2002 sebring lxi 2 door and the turn signals and

Customer Question

I have a 2002 sebring lxi 2 door and the turn signals and hazards have stoped working
Submitted: 10 months ago.
Category: Chrysler
Expert:  EricFromCT replied 10 months ago.

Hi. In the fuse box under the hood check fuse 20 (20amp). Also in the interior fuse box, check fuse 15 (10amp). Thanks.

Customer: replied 10 months ago.
That didnt help
Expert:  EricFromCT replied 10 months ago.

The fuses were ok?

Customer: replied 10 months ago.
Expert:  EricFromCT replied 10 months ago.

Ok. Did you replace the hazard flasher when you replaced the multi function switch? The hazard flasher is located right behind the multi-function switch and is common to cause no turn signals and hazard indicators.

Customer: replied 10 months ago.
What does it look like?
Expert:  EricFromCT replied 10 months ago.

Here is a diagram.

Customer: replied 10 months ago.
The hazard button is on the dash above the radio
Expert:  EricFromCT replied 10 months ago.

I am talking about the hazard and turn signal relay. Not the hazard button.

Customer: replied 10 months ago.
That diagram shows it on steering wheel? But zthats not where the hazard button is
Expert:  EricFromCT replied 10 months ago.

That may not even be the hazard button in the picture. The info is from the Chrysler workshop manual. You are interested in the relay. And the relay is mounted behind the multi-function switch, as shown in the picture.

Customer: replied 10 months ago.
Well i think i know what you are talking about because i seen a video on it my my car does not have that there is no place for one on mine in that spot
Expert:  EricFromCT replied 10 months ago.

Ok.

Customer: replied 10 months ago.
Would there be one in the dash behind the hazard button?
Expert:  EricFromCT replied 10 months ago.

Maybe your car is not an 02 model. I am on eastern time and need to go offline. We can continue this tomorrow, or I can opt-out and see if another expert can assist you tonight. It is up to you.

Customer: replied 10 months ago.
It is an 02 but i can get on tomorrow
Expert:  EricFromCT replied 10 months ago.

Ok. Please get me the VIN number for tomorrow as well.

Related Chrysler Questions